Starting from £10,149.00
The KTM 450 EXC-F SIX DAYS has long been the one to beat in the big 4-stroke stakes. Big power, unmatched agility and truck-loads of torque put this READY TO RACE enduro weapon at the sharp end of any offroad battle. For 2022, it retains its championship-winning pedigree, but brings re-tuned sustension, retro-styled graphics and even more presence to the race paddock.
Combining compact dimensions with immense power output, this 449.9 cc fuel-injected SOHC powerplant is the most powerful and refined on the market. Its class-leading power delivery is available throughout the entire rev range and with its low weight of only 29.2 kilograms, it's also one of the lightest 450 cc mills out there.
The KTM 450 EXC-F SIX DAYS engine is fitted with a compact SOHC cylinder head for optimal mass centralization. The head configuration promises efficient power delivery and unrivaled performance. A single overhead camshaft also ensures optimal gas flow, with low-friction rocker arms and timing chain guides guarantee consistent performance throughout the rpm range.
Located in an ideal position close to the center of gravity, The KTM 450 EXC-F SIX DAYS' crankshaft contributes to easier handling. It utilizes a short connecting rod, which makes for an overall compact and lightweight engine. The engine's pressurized lubrication system provides the necessary oil feed for the big end bearing. This design has a direct benefit for the crankshaft with extended service intervals. So just pin it, all day long.
CRANKCASES AND ENGINE COVERS
A lightweight engine case design allows for a very centralized shaft configuration while contributing to an efficient centralization of mass. Additionally, the engine covers feature a smart surface structure that reduces the wear caused by the rider's boots, keeping them looking as fresh as the day it rolled off the production line, while a reinforced clutch cover and engine guard mean the engine case is more robust.
The KTM 450 EXC-F SIX DAYS features a robust 6-speed transmission made by PANKL Racing Systems. The gears are made of a strong, forged raw material, ensuring the highest durability and reliability level. All four-stroke engines are fitted with a gear sensor, giving the option of different engine characteristics for each gear.
ENGINE MANAGEMENT SYSTEM
The state-of-the-art Keihin Engine Management System, with electronic fuel injection, features a 42 mm throttle body with separate systems for cold starting and idle adjustment. The throttle cable mount also allows for easy access and a smooth routing of cables for crisp throttle response, every time.
CYLINDER AND PISTON
Inside the short 95 mm bore cylinder is an extremely lightweight, box-in-box type piston made by König. In conjunction with the light but extremely durable piston pin, it is a major contributor to the engine's high performance, low vibrations, and speed. The compression ratio of 12.75:1 delivers exceptional engine performance and reduces the risk of engine knocking. Additionally, the top of the piston is optimized for highly efficient fuel combustion.
The multifunctional side-mounted counter balance shaft masterfully balances all the oscillating forces, while also driving the water pump. It effectively keeps engine vibrations to a minimum, resulting in the smoothest ride even at the highest engine speeds.
The KTM 450 EXC-F SIX DAYS is fitted with the extremely durable, KTM-developed DDS clutch (damped diaphragm steel), with a wear-free steel basket and heat-resistant clutch plates. It uses a diaphragm spring instead of the usual coil springs, which results in considerably easier clutch action. Additionally, the Brembo hydraulic system provides easy and precise clutch modulation throughout the entire operating temperature range.
The standard electric starter on the KTM 450 EXC-F SIX DAYS uses a proven starter drive and a strong starter motor made by Mitsuba. As demonstrated time and time again, it provides quick and reliable starting, saving you precious time and energy when you need it most.
Keeping the engine cool when the going gets tough comes courtesy of a pair of radiators, mounted close to the center of gravity. These make use of CFD technology (Computational Fluid Dynamics) and clever coolant circuit routing, achieving optimum engine temperature for the highest performance, in all conditions. Above all, the delta distributor, integrated into the frame triangle, features a large center tube for highly efficient coolant flow, as well as radiator fans as standard on all 4-stroke models.
Packing a punch and delivering an unmistakable engine note, all 4-stroke KTM SIX DAYS models feature an easy-access two-piece header pipe that can be disassembled easily to allow access to the rear shock. An aluminum muffler sleeve has a short and compact profile, which also proudly displays the SIX DAYS logo.
All KTM SIX DAY models feature high-tech, lightweight Chromoly steel frames with race-derived geometry, optimal stiffness, and unparalleled feedback for the rider. This translates into a playful handling character, with remarkable stability at speed. The subframe is made of extra-light and ultra-stable aluminum profiles, weighing less than 900 grams providing rear fender stability and durability in the event of a loop out.
The KTM 450 EXC-F SIX DAYS features a one-piece aluminum swingarm, which is manufactured using a gravity die-cast production process. This results in exceptional strength at the lowest possible weight and the perfect flex behavior.
KTM uses lightweight, CNC-machined hubs and high-end GIANT rims on all KTM SIX DAYS models. These guarantee maximum stability and the bare minimum weight, while aluminum spoke nipples feature an innovative design, which reduces the need to continuously tighten the spokes. They also look the part with unique SIX DAYS branding.
Putting the power to the ground is a set of aptly named, Metzeler 6 DAYS EXTREME tires. These provide excellent grip across any terrain, as well as self-cleaning knobblies to ensure all the traction, all of the time.
For 2022, all KTM EXC models have received a suspension update, with a firmer factory setting focusing on performance and improved consistency across different terrains.
New slots in the outer fork tube mean the 48 mm diameter WP XPLOR upside-down forks feed more oil to the bushes and reduce friction and heat build-up. The fork springs have also been updated with a new polished surface finish to improve consistency and new valve dedign increases rebound damping performance. The forks retain their adjustability, with compression damping on the left and rebound on the right.
The race-proven and fully adjustable WP XPLOR shock absorber has received a re-tune, with factory settings making it firmer, and new conical bushing between the pistons to improve bottoming reserves. This has resulted in reduced fade and improved wear, taking the PDS rear suspension design even further in its quest for podiums.
All SIX DAYS models are fitted with high-end, orange anodized CNC machined triple clamps. These have an offset of 22 mm, ensuring a solid grip of the fork, providing precise feedback through the handlebar. Speaking of which, the bars are adjustable forwards and backward over 4 positions allowing you to find your ideal 'attack' position.
High-tech Brembo brake calipers and lightweight wave brake discs ensure you stop when you need to. Thanks in part to a floating front brake disc and solid rear disc, brake fade is minimized and allows for harder braking, more of the time. For additional strength and reliability, the rear brake pedal is secured with a safety wire.
All KTM enduro models are fitted with lightweight polyethylene tank, with a ¼‐turn bayonet-style filler cap makes for quick and easy operation. The integrated fuel pump ensures a direct feed to the injectors, while a 90° connector provides protection against damage. The tank is also manufactured using see‐through plastic, riders are able to gauge fuel levels at a glance and on the go.
The easy-access airbox on the KTM 450 EXC-F SIX DAYS ensures optimal flow dynamics, thanks to specially designed intake snorkels. This means air is force-fed into the motor, resulting in the perfect balance of power and throttle response. Keeping the air clean, is a large Twin-Air air filter fitted to a rigid cage for ideal placement at all times.
Enduro is the original school of hard knocks. For that reason, KTM SIX DAYS models are fitted with factory protection which is developed to offer maximum protection, at the lowest possible weight. Made from special high-strength plastic using state-of-the-art 2-component injection molding technology, they mount directly to the frame for the perfect fit.
All KTM SIX DAYS models are equipped with adjustable, high-strength aluminum tapered handlebars, that can be mounted in four different positions. Standard with ODI vulcanized grip on the right side and a comfortable ODI lock-on grip on the left, your only worry is hanging on, and letting rip.
It goes without saying that six days spent in the saddle require a certain level of comfort. For that reason, the KTM 450 EXC-F SIX DAYS features a softer, grippier seat, finished in a striking blue and orange color combination.
Self-cleaning footpegs prevent mud from clogging up the pegs, even when dragging them through deep ruts. This means your boots maintain their grip, and you maintain your focus on the trail.
SIX DAYS EQUIPMENT
All KTM SIX DAYS models receive the full SIX DAYS treatment, meaning they benefit from an exclusive parts package, ranging from machined orange anodized triple clamps to a solid rear brake disc. Not to mention an assortment of parts emblazed with the SIX DAYS logo - there is no mistaking a KTM SIX DAYS for anything else.
With the postponement of the Italian 2020 International Six Days Enduro to 2021, the design focusing was shifted from traditionally only featuring the host nation, to showcase the entire world. A mix of playful design, retro colors, and unique design elements of a contemporary world map brings a positive message to the 2022 KTM SIX DAYS models. And, as always, these are applied using in-mold graphics which feature greater friction and fade resistance.
BATTERY & WIRING HARNESS
As with the rest of the KTM 4-stroke range, the KTM 450 EXC-F SIX DAYS is fitted with a proven, reliable electric start system. Powered by an ultra lightweight 2 Ah lithium-ion starter battery, it provides a safe, reliable starting time and time again, while the wiring harness has most of the electrical components carefully positioned under the seat for easy accessibility.
|Power in KW|
|Clutch||Wet, DDS multi-disc clutch, Brembo hydraulics|
|Design||1-cylinder, 4-stroke engine|
|Weight (without fuel)||106 kg|
|Tank Capacity (Approx.)||9.2 l|
|Front Brake Disc Diameter||260 mm|
|Rear Brake Disc Diameter||220 mm|
|Front Brake||Disc brake|
|Rear Brake||Disc brake|
|Chain||X-Ring 5/8 x 1/4"|
|Frame Design||Central double-cradle-type 25CrMo4 steel|
|Front Suspension||WP XPLOR-USD, Ø 48 mm|
|Ground Clearance||355 mm|
|Rear Suspension||WP Xplor PDS shock absorber|
|Seat Height||960 mm|
|Steering Head Angle||63.5 °|
|Suspension Travel (Front)||300 mm|
|Suspension Travel (Rear)||310 mm|
Get the latest news and offers straight to your inboxSIGN UP FOR NEWSLETTER